BTECH UV-25X4 (Second Gen.) Mini Mobile 25 Watt Tri Band Base, Mobile Radio: VHF, 1.255M, UHF Amateur (Ham)
$134.89
BTECH UV-25X4 Dual Watch monitoring VHF/UHF and 220Mhz: The 220 MHz band antenna lowpass filter is switched with a relay and the 2 meter lowpass filter and 70 cm high-pass filters are switched with PIN diodes – resulting in a audible relay switch noise when monitoring 220MHz with VHF/UHF simultaneously.
UV-25X4 (Second Generation) 25W Mobile Two Way Radio
The UV-25X4 is very much the same radio, our users have come to enjoy, with several new functionality improvements. The UV-25X4 has seen several performance improvements and tweaks in its second generation release.
RJ45 Audio Input & Output
The UV-25X4 has new menus and operations that allow audio I/O from its RJ45 microphone port. This allows the UV-25X4 to be installed for custom applications, where users want more control on where the speaker and mic audio is routed to.
VOX Handsfree Support
The UV-25X4 (Second Generation) includes VOX support. VOX allows for handsfree use with your favorite audio accessories or the included handheld microphone.
In the Box: UV-25X4 Mobile Radio DTMF Handheld Microphone Vehicle Cigarette Connector Power Cable (4.5′) Vehicle Mounting Bracket Screws & Mounting Hardware Easy-to-read Manual (written in the US) RJ-45 to Kenwood K1 Accessory Adaptor
When handling multiple conversations, the radio allows users to customize if the radio automatically switches to respond to active channels, or allow the user to set one channel default to transmit on.
Dual Synchronize Display Mode: Synchronize Up to 2 Channels – and display both their channel name and channel frequency!Microphone Audio Gain Settings: Sound great and customize your microphone output for any repeater
- Expanded Frequency Range Support
- Auto Power Off Function: Save your battery and prevent unnecessary power draining
- Channel Mode Editing Settings: Edit saved memory channels on-the-fly; our radio does not require you to delete a channel to make changes
- New Scanning Modes: Auto Scan (Scan with a power reboot), Scanning Resume, and Variable Frequency Scanning
- Quad Watch Delay Time: Allows the receiver to stay on the secondary channel longer after incoming transmission – customize the delay up to 50 seconds; This avoids manually channel switching when you are engaged with simultaneous contacts on two frequencies
- Randomization Privacy Mode
RJ45 to K1 Audio Adaptor: The UV-25X4 also includes a RJ45 to K1 Audio Adaptor, allowing you to use K1 audio accessories from our BTECH handheld radios with your mobile radio! The radio includes special menus to allow audio to be routed both through the UV-25X4 and K1 accessory, only through the radio, or only through the K1 audio accessory.
Uniquely customize your UV-25X4: The X-Series Mobiles use our Multi-Color LCD display screen. You can adjust the complete display colors to be exactly as you want it. Beyond the display, you can fully customize your channels to display their alpha-numeric names or frequency settings. There are 128 programmable memory channels. You can add or remove channels from scanning list. You can easily program from a PC or right on the radio itself. Pair the UV-25X4 with the Nagoya TB-320A Antenna and RB-50 Magnetic Mount for easy installation with the UHF antenna connectors.
Group Tones supported: The UV-25X4 supports the most common Analog Tones. It supports CTCSS, DCS, 2Tone, 5Tone, and DTMF calling methods. Set-up your calling methods to call by group tones. Tone calling (private line) is required by most repeater applications and the UV-25X4 supports the latest standards. The UV-25X4 can even send DTMF tones. This allows for sending ANI (Caller ID) or remote commands that require DTMF tones; or it can receive incoming DTMF tones to allow for remote stun or kill commands
Quad Watch and Display Sync: The UV-25X4 operates as multiple radios in one, with either VHF or UHF as the ‘Main’ band, while simultaneously watching up to 3 other frequencies or channels; and, if you like, you can configure your UV-25X4 for simultaneous VHF-VHF or UHF-UHF operation, too!
Dual Sync Display: With Dual Sync Display, you can synchronize channel lines to one or two channels. This allows you to sync display ‘lines’ to a single channel allowing the user to have both frequency and channel name data displayed simultaneously.
Technical Specifications
Bands Supported VHF, 220MHz, & UHF Tri Band Radio Memory Channel 200 Channels Output power VHF: 25W (Peak), 20W (AVG) / Low: 10W; 1.25M: 20W (Peak) 15W (AVG) / Low: 7W; UHF: 20W (Peak) 15W (AVG) / Low: 7W Tone Support CTCSS, DCS, 5TONE, 2TONE, DTMF Accessory Jack TRRS Speaker Output In Rear, RJ45 Audio Output in Front, K1 Accessories support with included Adaptor Additional Features Display Sync, Nuisance Channel Scan Skip, SOS Alarm, NOAA Weather Channels, Transmit Time-Out, Busy Channel Lockout, DTMF Keypad, Adjustable Scanning Modes, Quad Watch, Adjustable Squelch Size 3.85 (w) x 1.83 (h) x 4.65 (d) in Weight .9lb Antenna Jack UHF (SO239 Connector) Frequency Range FM: 87.5-108 MHz; VHF: 136-174 MHz; 1.25M: 220-225 MHz; UHF: 400-520 MHz
UV-25X4: SECOND GEN.
BTECH UV-25X4 VHF/1.25M/UHF Tri Band Radio
Second Generation
Dual Watch monitoring VHF/UHF and 220Mhz: The 220 MHz band antenna lowpass filter is switched with a relay and the 2 meter lowpass filter and 70 cm high-pass filters are switched with PIN diodes – resulting in a audible relay switch noise when monitoring 220MHz with VHF/UHF simultaneously. A relay that completely isolated the 220 MHz RF filter won’t impact the RF performance of the 2 meter/70 cm bands. If monitoring multiple 220MHz or VHF/UHF simultaneously the relay is not heard or used.
Product Dimensions : 5 x 4 x 2 inches; 1 Pounds
Item model number : UV-25X4
Date First Available : March 17, 2017
Manufacturer : BTECH
ASIN : B06XCDWT6V
Country of Origin : China
Enhanced Audio I/O Support: The UV-25X4 features upgraded audio input/output capabilities through its RJ45 microphone port and includes a K1 audio adapter. The widely compatible K1 accessory jack allows access to a vast range of aftermarket audio accessories, tailoring your radio experience to your preferences.
Effortless Installation and Adaptable Use: The UV-25X4 comes with all necessary mounting hardware for smooth integration into any vehicle. Easily convert it into a home or office base station with the optional RPS-30M power supply (sold separately).
Triple-Band Functionality: Operate the UV-25X4 as multiple radios in one, using 144 MHz, 220 MHz, or 430 MHz as the primary TX/RX band, while simultaneously monitoring up to 3 other frequencies or channels. Configure your device for VHF-VHF, VHF-UHF, or UHF-UHF operation according to your needs.
All-Inclusive Kit: Your purchase includes the BTECH UV-25X4, RJ45 to K1 Audio Adapter, Speaker Mic, DC Cable, Radio & Mic Brackets, Mounting Hardware, and a User Guide to help you get started with your advanced radio experience.
Dual Watch monitoring VHF/UHF and 220Mhz: The 220 MHz band antenna lowpass filter is switched with a relay and the 2 meter lowpass filter and 70 cm high-pass filters are switched with PIN diodes – resulting in a audible relay switch noise when monitoring 220MHz with VHF/UHF simultaneously. A relay that completely isolated the 220 MHz RF filter won’t impact the RF performance of the 2 meter/70 cm bands. If monitoring multiple 220MHz or VHF/UHF simultaneously the relay is not heard or used.
Mr. Two Way’s Two Cents: Purchasers like you find the two-way radio effective and reasonably priced. They find it useful for beginning operation in the 222MHz band. While most are satisfied with its size, some have mixed opinions on programming, sound quality, power draw, and FM radio reception.
Related Products
$134.89
